KHC-600D is ideally suited for cutting high precision T- joint circles including any hole that crosses the side of the pipe for piping systems, high pressure vessels and heat exchangers. Developed with Koike Advanced Technology, the KHC-600D is a compact design that is light weight and easy to operate.
In addition to cutting circles and bevel in flat plate, the machine can cut a vessel from the inside or outside.
- Automatic oxy-fuel pipe cutter
Automatically bevel cuts or straight cuts holes into pipe.
- Infinite rotational gas manifold
Tangle-free, infinite rotation gas manifold eliminates tension to the torch during cutting, ensuring accurate, sharp & clean cuts.
- H-lever handle
Torch height is automatically maintained to work distance based on trigonometry function of H-lever; very easy setup with just two adjustments.
- On/Off drive clutch
- Flat plate circle cutting
Can be used for circle cutting on flat plate.
|Cutting thickess||5 – 50 mm|
|Torch rotation speed||0.12 – 1.2 rpm|
|Cutting diameter||Ø80 – 600 mm|
|Minimum pipe diameter to mount the machine (without option)||800mm|
|Torch up/down stroke||0 – 100 mm|
|Torch revolving radius||r40 – 300 mm|
|Bevel angle||0 – 45°|
|Speed control||Control with dial operation|
|Pipe ratio branch : main||1:2 and above|
|Input power||AC 42V|
|Dimension||L1050 x W500 x H760 mm|
|Weight||26 kg (incl. support leg)|
Small diameter pipe fixture
Enables to cut pipes with diameter 250mm ~ 800mm.
Overhang cutting fixture
For cuting holes close to the end of a pipe. Small diameter pipe fixture option is required additionally.
Large diameter cutting option
Optional parts to cut holes up to 1000mm diameter is available. up/down stroke is unchanged from 100mm.